| Std. No. |
Standard Name |
| 1-GP-500 |
Methods of Test for Toxic Trace Elements in Protective Coatings |
| 1.110-M91 |
General Purpose Thinner For Lacquers |
| 1.124-99 |
Thinner for Vinyl Coatings |
| 1.136-92 |
Antiblush Thinner for Cellulose Nitrate Lacquer |
| 1.164-92 |
Solvent for Vinyl Pretreatment Coating |
| 1.164-99 |
Solvent for Vinyl Pretreatment Coating |
| 1.197-92 |
Thinner for Epoxy Coatings |
| 1.2-M89 |
Boiled Linseed Oil |
| 1.4-2000 |
Petroleum Spirits Thinner |
| 1.4-92 |
Petroleum Spirits Thinner |
| 1.500-75 |
Methods of Test for Toxic Trace Elements in Protective Coatings |
| 1.501-M89 |
Method for Permeance of Coated Wallboard |
| 1.70-99 |
High Solvency Thinner |
| 1.70-M91 |
High Solvency Thinner |
| 1.94-M89 |
Xylene Thinner (Xylol) |
| 10.3-92 |
Air-Setting Refractory Mortar |
| 11.3-M87 |
Hardboard |
| 11.5- M87 |
Hardboard, Precoated, Factory Finished, For Exterior Cladding |
| 12-GP-1b |
Standard for Glass: Safety, for Building Construction |
| 12.1-M90 |
Tempered or Laminated Safety Glass |
| 12.10-M76 |
Glass, Light and Heat Reflecting |
| 12.11-M9O |
Wired Safety Glass |
| 12.12-M90 |
Plastic Safety Glazing Sheets |
| 12.2-M91 |
Flat, Clear Sheet Glass |
| 12.20-M89 |
Structural Design of Glass for Buildings |
| 12.3-M91 |
Flat, Clear Float Glass |
| 12.4-M91 |
Heat Absorbing Glass |
| 12.5-M86 |
Mirrors, Silvered |
| 12.8-97 |
Glass Units |
| 149.10-M86 |
Determination of the Airtightness of Building Envelopes by the Fan Depressurization Method |
| 15.50-92 |
Technical Grade Acetone |
| 15.52-92 |
Technical Grade Methyl Ethyl Ketone |
| 155.1-2001 |
Firefighters' Protective Clothing for Protection Against Heat and Flame |
| 155.1-M88 |
Firefighters' Protective Clothing for Protection Against Heat and Flame |
| 164-GP-1MP |
Leachate Extraction Procedure |
| 19-GP-14M |
Sealing Compound, One Component, Butyl-Polyisobutylene Polymer Base, Solvent Curing |
| 19-GP-5M |
Sealing Compound, One Component, Acrylic Base, Solvent Curing |
| 19.13-M87 |
Sealing Compound, One-Component, Elastomeric, Chemical Curing |
| 19.22-M89 |
Mildew-Resistant Sealing Compound for Tubs and Tiles |
| 19.24-M90 |
Multicomponent, Chemical-curing Sealing Compound |
| 2-51.32-M77 |
Sheathing, Membrane, Breather Type |
| 21.1-93 |
Offset Lithographic Printing Ink |
| 24.3-92 |
Identification of Piping Systems |
| 28-GP-17 |
Fire Extinguishing Agent: Potassium Bicarbonate, Dry Chemical |
| 28-GP-20 |
Fire Extinguishing Agent: Sodium Bicarbonate, Dry Chemical |
| 28-GP-71 |
Fire Extinguishing Agent: Multipurpose, Monoammonium Phosphate, Dry Chemical |
| 3-GP -24Ma |
Turbine Fuel, Aviation, High-Flash Type |
| 3-GP-24d |
High-Flash Type Aviation Turbine Fuel |
| 3-GP-27c |
Lighting Naphtha |
| 3-GP-525Ma |
Isopropanol |
| 3-GP-531M |
Methanol, Technical |
| 3-GP-855M |
Ethylene Glycol, Uninhibited |
| 3.0 No. 14.3-94 |
Standard Test Method for the Identification of Hydrocarbon Components in Automotive Gasoline UsingGas Chromatography |
| 3.0 No. 14.3-99 |
Standard Test Method for the Identification of Hydrocarbon Components in Automotive Gasoline Using GasChromatography |
| 3.0 No. 140.1-2005 |
Low Temperature Flow Test (LTFT) for Diesel Fuels |
| 3.0 No. 140.1-M88 |
Low Temperature Flow Test (LTFT) for Diesel Fuels |
| 3.0 No. 16.0-2004 |
Sulphur in Diesel Fuel and Similar Middle Distillates by Energy Dispersive X-Ray Fluorescence Spectrometry(EDXRF) |
| 3.0 No. 16.0-95 |
Methods of Testing Petroleum and Associated Products: Sulphur in Diesel Fuel by Energy Dispersive X-RayFluorescence Spectrometry (EDXRF) |
| 3.0 No. 16.1-98 |
Methods of Testing Petroleum and Associated Products: Sulphur in Gasoline by Energy Dispersive X-rayFluorescence Spectrometry (EDXRF) |
| 3.0 No. 19.5-2004 |
Determination of Lead in Automotive Gasoline (Atomic Absorption) |
| 3.0 No. 19.5-2011 |
Methods of Testing Petroleum and Associated Products - Determination of Lead in Automotive Gasoline (AtomicAbsorption) |
| 3.0 No. 19.5-95 |
Determination of Lead in Automotive Gasoline (Atomic Absorption) |
| 3.0 No. 20.9-2005 |
CGSB Cetane Index of Diesel Fuels |
| 3.0 No. 20.9-95 |
CGSB Cetane Index of Diesel Fuels |
| 3.1000-2007 |
Vapour Control Systems In Gasoline Distribution Networks |
| 3.1000-M91 |
Standard for Vapour Control Systems in Gasoline Distribution Networks |
| 3.14-2006 |
Liquefied Petroleum Gas (Propane) for Fuel Purposes |
| 3.14-M78 |
Liquefied Petroleum Gas (Propane) |
| 3.14-M88 |
Liquefied Petroleum Gas (Propane) |
| 3.16-99 |
Mining Diesel Fuel |
| 3.16-M86 |
Mining Diesel Fuel |
| 3.16-M88 |
Mining Diesel Fuel |
| 3.2-2007 |
Heating Fuel Oil |
| 3.2-99 |
Heating Fuel Oil |
| 3.22-2002 |
Wide-Cut Type Aviation Turbine Fuel |
| 3.22-93 |
Aviation Turbine Fuel, Wide Cut Type |
| 3.23-2002 |
Kerosene-Type Aviation Turbine Fuel |
| 3.23-2005 |
Aviation Turbine Fuel (Grades JET A and JET A-1) |
| 3.23-2009 |
Aviation Turbine Fuel (Grades JET A and JET A-1) |
| 3.23-93 |
Aviation Turbine Fuel, Kerosine Type |
| 3.24-2005 |
Aviation Turbine Fuel (Military Grades F-34 and F-44) |
| 3.24-2008 |
Aviation Turbine Fuel (Military Grades F-34 and F-44) |
| 3.25-2004 |
Aviation Gasoline (Grades 80 and 100LL) |
| 3.25-M89 |
Gasoline, Aviation (Grades 80, 100 and 100LL) |
| 3.27-2005 |
Naphtha Fuel |
| 3.3-99 |
Kerosene |
| 3.3-M89 |
Kerosine |
| 3.5-2004 |
Unleaded Automotive Gasoline |
| 3.5-94 |
Unleaded Automotive Gasoline |
| 3.5-99 |
Unleaded Automotive Gasoline |
| 3.511-2005 |
Oxygenated Unleaded Automotive Gasoline Containing Ethanol |
| 3.511-93 |
Oxygenated Unleaded Automotive Gasoline Containing Ethanol |
| 3.511-M90 |
Oxygenated Unleaded Automotive Gasoline Containing Ethanol |
| 3.515-93 |
Oxygenated Unleaded Automotive Gasoline Containing Methanol and Cosolvent |
| 3.515-M9O |
Oxygenated Unleaded Automotive Gasoline Containing Methanol and Cosolvent |
| 3.517-2000 |
Automotive Low-sulphur Diesel Fuel |
| 3.517-2007 |
Automotive (On-road) Diesel Fuel |
| 3.517-93 |
Automotive Low Sulfur Diesel Fuel |
| 3.519-94 |
Oxygenated Unleaded Automotive Gasoline Containing C3, C4 and/or C5 Alcohols |
| 3.520-2005 |
Automotive (On-road) Diesel Fuel Containing Low Levels of Biodiesel Esters (B1- B5) |
| 3.6-2000 |
Regular Sulphur Diesel Fuel |
| 3.6-2010 |
Off-Road Diesel Fuel |
| 3.6-M90 |
Automotive Diesel Fuel |
| 32.301-M87 |
Canola Meal |
| 34.1-M87 |
Asbestos Cement Pressure Pipe |
| 34.14-M89 |
Sheets, Asbestos-Cement, Decorative |
| 34.16-M89 |
Sheets, Asbestos-Cement, Flat, Fully Compressed |
| 34.17-M89 |
Sheets, Asbestos-Cement, Flat, Semicompressed |
| 34.21-M89 |
Panels, Sandwich, Asbestos-Cement, With Insulating Cores |
| 34.22-94 |
Asbestos-Cement Drain Pipe |
| 34.22-M87 |
Asbestos Cement Drain Pipe |
| 34.23-94 |
Asbestos Cement House Connection Sewer Pipe |
| 34.4-M89 |
Siding, Asbestos-Cement, Shingles and Clapboards |
| 34.5-M89 |
Sheets, Asbestos-Cement, Corrugated |
| 34.9-94 |
Asbestos Cement Sewer Pipe |
| 37-GP-12Ma |
Application of Unfilled Cutback Asphalt for Dampproofing |
| 37-GP-18Ma |
Tar, Cutback, Unfilled, for Dampproofing |
| 37-GP-21M |
Tar, Cutback, Fibrated, for Roof Coating |
| 37-GP-36M |
Application of Filled Cutback Asphalts for Dampproofing and Waterproofing |
| 37-GP-37M |
Application of Hot Asphalt for Damp-proofing or Waterproofing |
| 37-GP-52M |
Roofing and Waterproofing Membrane, Sheet applied, Elastomeric |
| 37-GP-55M |
Application of Sheet Applied Flexible Polyvinyl Chloride Roofing Membrane |
| 37-GP-56M |
Membrane, Modified, Bituminous, Prefabricated, and Reinforced for Roofing |
| 37-GP-64M |
Mat Reinforcing, Fibrous Glass, for Membrane Waterproofing Systems and Built-up Roofing |
| 37-GP-6Ma |
Standard for: Asphalt, Cutback, Unfilled, for Dampproofing |
| 37-GP-9Ma |
Primer, Asphalt, Unfilled, for Asphalt Roofing, Dampproofing and Waterproofing |
| 37.1-M89 |
Chemical Emulsifier Type, Emulsified Asphalt for Dampproofing |
| 37.16-M89 |
Filled, Cutback Asphalt for Dampproofing and Waterproofing |
| 37.2-M88 |
Emulsified Asphalt, Mineral-Colloid Type, Unfilled, for Dampproofing and Waterproofing and for Roof Coatings |
| 37.22-M89 |
Application of Unfilled, Cutback Tar Foundation Coating for Damp-proofing |
| 37.3-M89 |
Application of Emulsified Asphalts for Dampproofing or Waterproofing |
| 37.4-M89 |
Fibrated, Cutback Asphalt, Lap Cement for Asphalt Roofing |
| 37.5-M89 |
Cutback Asphalt Plastic, Cement |
| 37.50-M89 |
Hot-Applied, Rubberized Asphalt for Roofing and Waterproofing |
| 37.51-M90 |
Application for Hot-Applied Rubberized Asphalt for Roofing and Waterproofing |
| 37.54-95 |
Polyvinyl Chloride Roofing and Waterproofing Membrane |
| 37.8-M88 |
Asphalt, Cutback, Filled, For Roof Coating |
| 4.2 No. 27.5-94 |
Flame Resistance - 45° angle Test - One Second Flame Impingement |
| 41-GP-25M |
Standard for: Pipe, Polyethylene, for the Transport of Liquids |
| 41-GP-31M |
Tubing, Plastic, Corrugated, Heavy Duty, for Subsurface Disposal of Sewage Effluent |
| 41-GP-31Ma |
Tubing, Plastic, Corrugated, Heavy Duty, for Subsurface Disposal of Sewage Effluent |
| 41-GP-6M |
Standard for: Sheets, Thermosetting Polyester Plastics, Glass Fiber Reinforced |
| 41.24-95 |
Rigid Vinyl Siding, Soffits and Fascia |
| 43-GP-72MP |
Provisional Standard for: NAILED WOODEN BOXES (TC-14, TC-15A, TC-15B, TC-15C, TC-15D) |
| 43.110-93 |
Multiwall Paper Bags (TC-44B) |
| 43.111-93 |
Multiwall Paper Bags (TC-44C) |
| 43.112-93 |
Multiwall Paper Bags (TC-44D) |
| 43.113-93 |
Multiwall Paper Bags (TC-44E) |
| 43.114-M9O |
Non-reusable Steel Drums, Removable Head (TC-37C) |
| 43.115-M90 |
Non-reusable, Cylindrical Steel Overpack for Inside Plastic Containers (TC-37M) |
| 43.116-M90 |
Non-reusable Steel Drums with Polyethylene Liners (TC-37P) |
| 43.123-2010 |
Aerosol Containers and Gas Cartridges for Transport of Dangerous Goods |
| 43.123-M86 |
Containers, Metal, Aerosol (TC-2P, TC-2Q) |
| 43.123-M86 |
Récipients aérosol métalliques (TC-2P, TC-2Q) |
| 43.124-M89 |
Inside Metal Containers and Liners (TC-2F AND TC-2N) |
| 43.125-2003 |
Design and Manufacture of Packaging for the Transportation of Infectious Substances, Diagnostic Specimens,Biological Products or (Bio) Medical Waste |
| 43.125-99 |
Packaging of Infectious Substances, Diagnostic Specimens, Biological Products and Biomedical Waste forTransport |
| 43.125-M90 |
Packaging of Infectious Substances and Diagnostic Specimens |
| 43.126-2008 |
Reconditioning, Remanufacturing and Repair of Drums for the Transportation of Dangerous Goods |
| 43.126-94 |
Remanufacturing and Reconditioning of Steel Drums Used for the Transportation of Dangerous Goods |
| 43.126-98 |
Remanufacturing and Reconditioning of Drums Used for the Transportation of Dangerous Goods |
| 43.146-2002 |
Design, Manufacture and Use of Intermediate Bulk Containers for the Transportation of Dangerous Goods |
| 43.146-94 |
Intermediate Bulk Containers for the Transportation of Dangerous Goods |
| 43.147-2002 |
Construction, Modification, Qualification, Maintenance, and Selection and Use of Means of Containment for theHandling, Offering for Transport, or Transporting of Dangerous Goods by Rail |
| 43.147-2005 |
Construction, Modification, Qualification, Maintenance, and Selection and Use of Means of Containment for theHandling, Offering for Transport, or Transporting of Dangerous Goods by Rail |
| 43.147-97 |
Construction and Maintenance of Tank Car Tanks and Selection and Use of Tank Car Tanks, Portable Tanks andRail Cars for the Transportation of Dangerous Goods by Rail |
| 43.150-95 |
Performance Packagings for Transportation of Dangerous Goods |
| 43.150-97 |
Performance Packagings for Transportation of Dangerous Goods |
| 43.150-M89 |
Performance Packagings for Transportation of Dangerous Goods |
| 43.151-97 |
Packing of Explosives (Class 1) for Transportation |
| 43.55-95 |
Reusable Polyethylene Drums With Non-Removable Head Without Overpack (TC-34) |
| 43.55-M87 |
Drums, Polyethylene, Reusable, Non-Removable Head, without Overpack (TC-34) |
| 43.57-92 |
Inside Plastic Containers (TC-2E, TC-2S, TC-2SL, TC-2T, TC-2TL and TC-2U) |
| 43.58-93 |
Inside Paper Bags and Linings (TC-2D, TC-2J, TC-2K, TC-2L, TC-2M) |
| 43.60-92 |
Non-reusable Polyethylene Drum, Removable Head (TC-35) |
| 43.67-93 |
Lined Cloth and Paper Bags (Tc-45b) |
| 43.69-M90 |
Cylindrical Steel Overpack for Inside Plastic Container (TC-6D) |
| 43.84-M89 |
Fibreboard Boxes for Inside Plastic Containers (TC-12P) |
| 43.86-M90 |
Fibre Drums (TC-21C) |
| 43.87-M90 |
Fibre Drum for an Inside Plastic Container (TC-21P) |
| 43.90-M89 |
Nonreusable Fibreboard Boxes (TC-12A) |
| 43.91-M89 |
Fibreboard Boxes (TC-12B) |
| 43.93-M89 |
Fibreboard Boxes (TC-12D) |
| 43.95-M89 |
Fibreboard Boxes (TC-12H) |
| 43.96-M89 |
Steel Drums, Removable or Non-removable Head (TC-5B) |
| 43.97-M90 |
Stainless Steel Drums, Non-removable Head (TC-5C) |
| 48.14-M86 |
Advanced Manual For: Eddy Current Test Method |
| 48.20-94 |
Certification of Nondestructive Testing Personnel (Police and Security Radiography Method) |
| 48.9712-2000 |
Non-destructive Testing - Qualification and Certification of Personnel (ISO 9712:1999, MOD) |
| 48.9712-2006 |
Non-destructive Testing - Qualification and Certification of Personnel |
| 48.9712-95 |
Qualification and Certification of Nondestructive Testing Personnel |
| 51-GP-27M |
Thermal Insulation, Polystyrene, Loose Fill |
| 51.25-M87 |
Thermal Insulation, Phenolic, Faced |
| 51.33-M89 |
Vapour Barrier Sheet, Excluding Polyethylene, for Use in Building Construction |
| 51.34-M86 |
Vapour Barrier, Polyethylene Sheet for Use in Building Construction |
| 62-GP-11M |
Marking Material, Retroreflective Elements, Adhesive Backing |
| 62-GP-12 |
Marking Material, Retroreflective Elements Flexible Type |
| 63.14-M89 |
Plastic Skylights |
| 65-GP-11 |
Standard for Personal Flotation Devices |
| 65-GP-14M |
Life Jackets, Inherently Buoyant, Standard Type |
| 65-GP-7 |
Specification for Life Jackets; Inherently Buoyant Type |
| 65.11-M88 |
Personal Flotation Devices |
| 65.15-M88 |
Personal Flotation Devices for Children |
| 65.16-2005 |
Immersion Suit Systems |
| 65.16-M89 |
Marine Abandonment Immersion Suit Systems |
| 65.17-99 |
Helicopter Passenger Transportation Suit Systems |
| 65.17-M88 |
Helicopter Passenger Transportation Suit Systems |
| 65.3-M88 |
Life-Saving Cushions |
| 65.7-2007 |
Life Jackets |
| 65.7-M80 |
Life Jackets, Inherently Buoyant Type |
| 65.7-M88 |
Lifejackets, Inherently Buoyant Type |
| 7.1-98 |
Lightweight Steel Wall Framing Components |
| 7.2-94 |
Adjustable Steel Columns |
| 82.1-M89 |
Sliding Doors |
| 82.5-M88 |
Insulated Steel Doors |
| 82.6-M86 |
Doors, Mirrored Glass, Sliding or Folding, Wardrobe |
| 93.1-M85 |
Sheet Aluminum Alloy, Prefinished, Residential |
| 93.2-M91 |
Prefinished Aluminum siding, Soffits and Fascia, for Residential Use |
| 93.3-M91 |
Prefinished Galvanized and Aluminium-Zinc Alloy Steel Sheet for Residental Use |
| 93.4-92 |
Galvanized Steel and Aluminum-Zinc Alloy Coated Steel Siding, Soffits and Fascia, Prefinished, Residential |
